How to Hang Thick Curtains On Drywall Or Plasterboard

How to Hang Thick Curtains On Drywall Or Plasterboard

The majority of individuals only hang new curtains over framed windows when they shop. However, did you know that inside windows may also have curtains installed? Although plasterboard, often referred to as drywall or gib board, may seem sturdy enough, it is not screw-proof, and if a curtain rod is installed incorrectly, the result will be a drooping drape and a hole that has to be fixed. Nonetheless, even bulky materials like velvet may be securely and properly hung on inside windows without a wooden border if the proper equipment and methods are used.

How to Hang Thick Curtains

The three primary techniques for hanging heavy curtains on plasterboard are examined in today's blog post: center support brackets, longer screws, and curtain rod anchors. Depending on the design you choose, different materials are required for installing curtains. Still, you may place curtains on plasterboard using the following methods for most curtain types. 

This is how to hang thick drapes on drywall or plasterboard:

1. Make use of longer nails or screws

2. Include wall anchors

3. Put in more brackets.

1. Make use of longer nails or screws

Regardless of the method you choose, the first thing to do when hanging blinds or curtains on drywall is to make sure there is a stud behind the section of the wall you wish to drill into. If not, the weight of the curtains might rip the plaster.

Usually, brackets that are fastened to the wall with nails and screws support curtain rods. Nevertheless, these brackets may need a little more help to remain stable when hanging thick curtains on plasterboard. Installing the brackets with larger screws or longer nails is the best method to do this. Compared to the screws used in standard window installation, the additional length helps spread the weight of the curtains farther into the plasterboard, strengthening the connection. To get the ideal fit, you don't want to keep drilling and inflicting further damage to the wall, so be sure to choose your screws or nails wisely.

2. Include wall anchors

The easiest approach to make sure heavy curtains are secure is, as you know, to connect the brackets to a stud below the plasterboard, but this isn't always practicable. Wall anchors are useful since studs are often located 40–60 centimeters apart, making it unlikely that you would find a stud where you wish to place a bracket.

The majority of hardware shops have wall anchors, which are made of various materials and forms. Make sure the fixture is rated for the weight you want to use and that the location of installation is suitable before making a purchase (e.g., wall anchors instead of ceiling anchors).

To ensure proper alignment and prevent having to install the anchors again, it's a good idea to double-check their location after attaching the first one. To verify the level using a spirit level, just insert one end of the rod into the bracket and hold the other end against the mark.

3. Put in more brackets

Another method to stabilize heavy window coverings and keep them from drooping is to install a center support bracket if your curtain rod can be fastened to a stud. Doubtful whether you need an additional bracket? Remember that support brackets for curtain rods are often needed every 70–90 centimeters, therefore if your window is longer than 1.5 meters, you will need two support brackets minimum.

Once the brackets are firmly in place, position the curtain rod over them and lengthen it until the ends line up with the outer surfaces of the brackets. After determining the center using a measuring tape, connect the third bracket onto the rod, press it up against the wall, and fasten it with screws. Too simple!

The Last Word

We hope you can have your heavy drapes hanging safely fixed after following this tutorial. Of course, you can find out more information on our website if you still have questions regarding how to put curtains on plasterboard or how to install curtains in general. Alternatively, you may reach out to our team by visiting our contact page; they are always happy to assist.